Monday, January 28, 2008

Riveted Left Aileron Hinge Brackets


Outboard W414 Riveted in place. The two rivets near the bearing are 426 flush rivets.

Outboard W414. Watch the rivet call outs. The lower rivet next to the cleco is a 426 flush rivet. If you look closely you can see where I etched the part numbers before priming..

Riveted the Left W413 Aileron Hinge Bracket in place. -Notice that the lower rivet and the rivets near the bearing are 426 flush rivets. I also had to grind down and reprime the top of the assembly slightly to prevent any interference with the rear spar flange.

Opposite view. W413. two 426 rivets at the top, near the hole.

No comments: