Tuesday, May 17, 2011

Final Fitting of the Plenum

Right side intake lined of with right plenum inlet. *A rubber tube will connect the two together soon.

Left side intake lined up with left plenum inlet. I also have good clearance between the plenum and the top cowling all around. I was sweating this for a while, as I had fit the plenum before the cowling. It turned out perfect... Tip-Do lots of research before trimming your plenum.

Side view. What little gap remains will be filled with high temp RTV.

Aft side. A good snug fit.

The front gap was filled with 1/2" square high temp rubber. *The little gap at the top will be filled with high temp RTV.

No comments: