The following is a brief and simple description of my construction of a Vans RV8 aircraft. Scroll down to the labels for a complete log of each section. Enjoy!
*This blog is for entertainment purposes only* *DREAM IT, BUILD IT, FLY IT*
Friday, February 25, 2011
Fitting the Spinner
Marking the middle of the spinner.
Spinner bulkheads prepped,riveted, primed and temporarily screwed on.
Marking the initial prop cutout. There was some additional trimming and fitting after the first cut.
Prop cutout done! I turned the prop with a pair of clamped 3ft 2x4s to check the clearance.