The following is a brief and simple description of my construction of a Vans RV8 aircraft. Scroll down to the labels for a complete log of each section. Enjoy!
*This blog is for entertainment purposes only* *DREAM IT, BUILD IT, FLY IT*
Friday, December 26, 2008
Control Sticks Full Aft and Elevators Up Max 30 degrees to the stops.
Elevator Push Rods all epoxy primed, adjusted, and bolted in place. I will be ordering stick grips soon...
One of the Bell Cranks.
Close Up of the Bell Crank.
Aft Tail Cone F840 Push Rod connected to the elevator horns. I used 3 spacer washers on each side of the end bearing.