Wednesday, October 10, 2007

Sealed the Outboard and Inboard Rib

I riveted and sealed the reinforcement plate at the outboard leading edge. I also sealed and riveted a AN470 AD6 rivet in the aft tooling hole.

*UPDATE- Ooooops! Don't seal the AN Fittings yet. I had to take them back off and re-clean everything as soon as I realized that I couldn't rivet the rib to the skin with them in place. Doh!
Inboard rib. I sealed the reinforcement ring and fuel vent/vapor return line AN fittings.

No comments: