I think we are ready to seal the epoxy resin layers with some epoxy primer.
I'm sanding the epoxy resin coats with 100 grit sandpaper.
After the resin was dry, I started sanding, both inside and out. I'm not too concerned
with making the inside pretty.
Cowl cleaned,sanded, and coated with epoxy resin thinned with acetone. I used a squeegee to help fill in the pinholes. You don't want a thick layer, it will only lead to more sanding....
Tip-Use a small roller to level out the squeegee marks.
*This step was done twice.
No comments:
Post a Comment