Control Sticks Full Aft and Elevators Up Max 30 degrees to the stops.Elevator Push Rods all epoxy primed, adjusted, and bolted in place. I will be ordering stick grips soon...
One of the Bell Cranks.
Close Up of the Bell Crank.
Aft Tail Cone F840 Push Rod connected to the elevator horns. I used 3 spacer washers on each side of the end bearing.
One of the Bell Cranks.
Close Up of the Bell Crank.
Aft Tail Cone F840 Push Rod connected to the elevator horns. I used 3 spacer washers on each side of the end bearing.
1 comment:
Are you planning to use any 'Autopilot' for your RV ?
Post a Comment